Page 2 of 3

PostPosted: Wed Dec 01, 2004 12:41 am
by JBG
Does it work ok in his pc?

If yes, then its either not fitted correctly or you have a power problem.

PostPosted: Wed Dec 01, 2004 1:12 am
by chiggz_likes_owen
aiya still dunno what i'm doing, looks like i have to stick with my old graphics card.

PostPosted: Wed Dec 01, 2004 1:19 am
by gaz31
try connecting the monitor cable straight into the motherboard default slot whilst you have your mx420 in the agp slot if the startup screen still appears then the card is shagged or not compatable with your motherboard which is quite common with tiny pc's as they are in business with radeon!!

PostPosted: Wed Dec 01, 2004 10:38 am
by Woollyback
I haven't understood a bloody word of the last 2 pages :D

PostPosted: Wed Dec 01, 2004 4:42 pm
by Dom1
get one of those PC for dummies books

PostPosted: Wed Dec 01, 2004 6:41 pm
by Woollyback
Dom1 wrote:get one of those PC for dummies books

Nah, just cos I said I didn't undeerstand it doesn't mean I was actually interested :D

PostPosted: Wed Dec 01, 2004 6:55 pm
by Dom1
:D  ditto

PostPosted: Wed Dec 01, 2004 7:03 pm
by Woollyback
I.T.  :oh:  :D

PostPosted: Wed Dec 01, 2004 9:00 pm
by Leonmc0708
The power of this utility is the ability to manage almost any process running on your system. A process is any program running in system memory. The operating system controls when different processes have access to system resources by assigning them priority levels. If two processes want access to the CPU, for example, the process with the higher priority level will run first. With this knowledge, it is possible to configure your system to optimize a given task by increasing the priority of the processes associated with it. As well, if you are developing code, you can monitor your applications and check for memory leaks. Finally, knowing exactly what processes are running on your system will help you to tighten down your security, denying Trojans or stealth viruses from launching themselves.

PostPosted: Wed Dec 01, 2004 9:36 pm
by JBG
Nerd.

PostPosted: Wed Dec 01, 2004 10:00 pm
by who the hell is diarra
Ya did whowherewiththewhatnow ??? ???  ???

PostPosted: Wed Dec 01, 2004 10:01 pm
by who the hell is diarra
Mine's got an on button :D

PostPosted: Wed Dec 01, 2004 10:51 pm
by Woollyback
Mine's got about 50 buttons :)  don't know what most of them do like, but it's got about 50 of them :D

PostPosted: Wed Dec 01, 2004 11:24 pm
by A.B.
Dom1 wrote:get one of those PC for dummies books

I got one and its not really helping.  :D

PostPosted: Wed Dec 01, 2004 11:41 pm
by chiggz_likes_owen
Leonmc0708 wrote:The power of this utility is the ability to manage almost any process running on your system. A process is any program running in system memory. The operating system controls when different processes have access to system resources by assigning them priority levels. If two processes want access to the CPU, for example, the process with the higher priority level will run first. With this knowledge, it is possible to configure your system to optimize a given task by increasing the priority of the processes associated with it. As well, if you are developing code, you can monitor your applications and check for memory leaks. Finally, knowing exactly what processes are running on your system will help you to tighten down your security, denying Trojans or stealth viruses from launching themselves.

???